How To Use

The following pictures will give you a visual of how easy the E-Z Out-Rodder is to use:


Step 1:
Place the Marked (Port) / Starboard) E-Z Outrodder in the gunwale mount rodholder.

Step 2:
Place fishing rod in the E-Z Outrodder and lock in gimble. (You should always use a safety line at least 6 feet in length from your reel to your cleat.)

DO NOT USE a tight drag. it can ruin your gimble pin in your flush mounted rod holder and or damage your locking cut on your E-Z Out-Rodder.

Step 3:
When a fish is hooked, grab your rod and pull gently toward you and release the pin.

DO NOT USE THE RELEASE PIN WHEN USING WIRE LINE OR DEEP LURE TROLLING, IT IS USED ONLY WHEN FISHING SURFACE LURES IF MAKING SHARP TURNS.

DO NOT STORE YOUR OUTRODDER WITH THE RELEASE PIN  IN.

EzOutrodder Is not responsible for any damage if these instructions are not followed



Step 4:
Lift the rod and E-Z Outrodder to a vertical position.



Step 5:
Lift the rod out of the E-Z Outrodder with a slight pull towards you and reel in the fish.

Please note, shad rigs, umbrella rigs, or any heavy dredges which require using a tight or locked drag are not suitable and will cause damage to the locking cuts on the Out-Rodders.

Join The RFA

Save The Summer Flounder

Facebook